Probe Sensor and Tester

Product Details:

The probe tip (ball 4 mm or 0.2 inch) is compatible to all HAIMER 3D-Sensors. It could be changed without any tool, no re-calibration of the unit is needed

Product Details:

Digital Inch 3D- Sensor
Digital 3D-Sensor Highly accurate - safe handling The Digital 3D-Sensor is a further development of the time proven Mechanical 3D-Sensor. It serves for setting workpiece edges on milling and EDM machines. The spindle may be positioned quickly and safely on the reference edge. The setting operation can be precisely monitored on the digital display and the zero position is found on the first try. The machine coordinate system can be set without any calculations because the spindle axis is positioned exactly on the approached edge. The digital display has large, easy-to-read numbers with measurements in increments of 0.0002". It can be easily read from a long distance (i.e. when mounted on a large machining center). The digital display is splash-proof and dust-proof (IP64) and can be stored in the tool magazine of the machin

Technical details

• 3D-Sensor Digital with clamping shank, diam. 3/4" including short probe tip 0.2"
• Smallest unit of measure 0.00005"
• Repeatability 0.00005"
• Measuring accuracy 0.0002"

Accessories

• Short probe tip Length 1" - ball tip 0.2"
• Long probe tip Length 2.6" - ball tip 0.4"

Product Details:

The 3D-Sensor New Generation is a further development of our worldwide accepted and proven Universal 3D-Sensor. Its distinguishing features are improved mechanics and a new and compact design. In combination with the integrated short adapters - available in SK 30, BT 30, HSK-25/32/40/50/63 - it is the ideal solution for small milling and EDM machines.

Version

• With integrated short adapter in version SK30, BT30, HSK-25/32/40/50/63
• Short and long probe tips available, no tool change necessary
• No re-calibration of the sensor is needed
• Enhanced overrun distance
• IP 67 waterproof

Application

• For small Milling and EDM machines (isolated probe)
• For workpiece-reset and length measuring
• Any direction approach (X-, Y-, Z-axis)

 

Please take note The given measuring precision of 0.01 mm only applies if the original HAIMER probe tips are used.

Included in delivery 3D-Sensor New Generation with integrated short adapter, short probe tip 4 mm

Technical data subject to change without prior notice.

Probe tips

The sensors can be equipped with a short (ball 4 mm / 0.2") and a long (ball 8 mm / 0.4") probe tip. The probe tips may be changed without any tool, no re-calibration of the unit is needed.
The probe tips of course are compatible to all HAIMER 3D-Sensors.

Additional Information:

• Item Code: 80.364.30.FHN
• Delivery Time: 7-8 days
• Packaging Details: Courier

Product Details:

The Universal 3D-Sensor is a very precise and versatile measuring instrument for milling and EDM machines (insulated probe).

The 3D-Sensor is clamped into a tool holder and inserted into a milling spindle. Once clamped into the machine spindle, the run-out (T.I.R) is fully adjustable to Zero. Then, you are able to find exact positioning of the spindle axis on the edges of the workpiece. This allows for zeros to be set and the length to be measured quickly and easily. You may approach in any direction (X-, Y-, Z- axis - hence the name ,,3D-Sensor"). When the dial gage shows zero, the spindle axis is exactly on the workpiece edge.

Only the HAIMER 3D-Sensor allows for the edge to be found on the first attempt. No calculating of the probe's ball diameter is necessary - just Zero it out! Problems with mathematics or calculations are eliminated, allowing for fewer operator errors. Our 3D-Sensor is quick and easy, reducing the extra time needed with most edge-finders, increasing the productivity and accuracy of the operator.

Simply bring the needle to Zero, and that is your edge with any probe. The accuracy is such that you are able to inspect your parts right on the machine. Tram vises, find the center of your bore, find your edge and inspect parts - it is all possible with the HAIMER 3D-Sensor. The unit has a large overrun distance in connection with the fully tested preset breaking points giving the sensor long life. All Universal 3D-Sensors are individually tested and adjusted when being assembled in order to achieve a maximum of measuring precision.

The Sensor is waterproof according to IP 67.

Please take note The given measuring precision of 0.01 mm / 0.0004" only applies if the original HAIMER probe tips are used.

Included in delivery

• -Metric version Universal 3D-Sensor with clamping shank 20 mm, short probe tip 4 mm
• -Inch version Universal 3D-Sensor with clamping shank 3/4', short probe tip 0.2'

 

Technical data subject to change without prior notice.

Probe tips

The sensors can be equipped with a short (ball 4 mm / 0.2") and a long (ball 8 mm / 0.4") probe tip. The probe tips may be changed without any tool, no re-calibration of the unit is needed.
The probe tips of course are compatible to all HAIMER 3D-Sensors.

Product Details:

The 3D-Sensor New Generation is a further development of our worldwide accepted and proven Universal 3D-Sensor. Its distinguishing features are improved mechanics and a new and compact design.

Advantages

• Compact and easy to grip casing, no restriction to working area
• Precise display of spindle position with large 1/100 mm dial gauge (2 hands)
• Marked overrun distance (safety distance)

Functions

• Aligning machine spindles to work piece edges and reference edges (X-, Y-, Z-axis)

• Set zeros
• Centre borings and shafts
• Measuring lengths and depths
• Checking straightness and levelness of surfaces
• Aligning work pieces and vices
• Quick, without calculations, no mistakes with algebraic signs

Please take note
The given measuring precision of 0.01 mm only applies if the original HAIMER probe tips are used.

Included in delivery
3D-Sensor New Generation with clamping shank 12 mm, short probe tip 4 mm

Probe tips
The sensors can be equipped with a short (ball 4 mm / 0.2") and a long (ball 8 mm / 0.4") probe tip. The probe tips may be changed without any tool, no re-calibration of the unit is needed.

The probe tips of course are compatible to all HAIMER 3D-Sensors.

Additional Information:

• Delivery Time: 4-5 days
• Packaging Details: BOX